HANYANG UNIVERSITY
Laboratory for High Temperature
Physicochemical Processing of Materials
RESEARCH
-
Fundamental Research for Producing High-Purity & High-Cleanliness Stainless Steels
Thermodynamic Investigation on the Formation of Inclusions containing MgAl2O4 Spinel during 16Cr-14Ni Austenitic Stainless Steel Manufacturing Processes
(Park; Mater. Sci. Eng. A, 2008, vol.472, p.43) -
Refining of High-Mn Steels for Next Generation Applications
Characterization of Non metallic Inclusions in High Manganese and Aluminum-Alloyed Austenitic Steels
(Park et al.; Metall. Mater. Trans. A, 2012, vol.43A, pp. 2316-2324) -
Applications of Computational Thermodynamics for Producing High-Clean Steels ; Focusing on Smart Manufacturing
Effect of CaO/Al2O3 ratio of ladle slag on formation behavior of inclusions in Mn and V alloyed steel
(Shin and Park; ISIJ Int., 2018, vol.58, pp.88-97) -
Novel Manufacturing Processes for Advanced High-Entropy Alloys
Characterization of non-metallic inclusions and their influence on the mechanical properties of a FCC single-phase high-entropy alloy
(Choi, Lim, Na, Glatzel and Park; J. Alloys & Compd., 2018, vol.763, pp.546-557) -
Grain Refinement of Macro- & Microstructure of Steels using Non-Metallic Inclusions
Effect of nitrogen on grain growth and formability of Ti-stabilized ferritic stainless steel
(Lee, Kim and Park: Scientific Reports, 2019, vol.9, article #6369, pp.1-11) -
Zn-Al-Fe Dross Formation Mechanism in Hot Dip Galvanizing Bath for Producing Advanced Automotive Steels
Effect of initial iron content in a zinc bath on the dissolution rate of solid iron during hot dip galvanizing process
(Lee, Pak and Park; Metall. Mater. Trans. A, 2017, vol.48A, pp.1788-1796) -
Physical Chemistry of MnO-base Slags for Producing High Functional Manganese Ferroalloys
Effect of atmosphere and slag composition on the evolution of PH3 gas during cooling of reducing dephosphorization slags
(Shin and Park ; ISIJ Int., 2013, vol.53, pp.385-390) -
Viscosity-Structure Relationship of Molten Slags and Glasses
Structure-Viscosity Relationship of Low-silica Calcium Aluminosilicate Melts
(Kim and Park: ISIJ Int., 2014, vol.54, pp.2031-2038) -
High Temperature Physical Chemistry of Metals and Slags
Effect of Direct Reduced Iron (DRI) on Dephosphorization of Molten Steel by Electric Arc Furnace Slag
(Heo and Park; Metall. Mater. Trans. B, 2018, vol.49B, pp.3381-3389) ; TMS-EPD (Extraction & Processing Division) Science Awarded Paper -
Characterization of Chemical Reactions at Slag-Refractory Interface in High Temperature Reactors
Interfacial reaction between magnesia refractory and “FeO”-rich slag: Formation of magnesiowüstitie protective layer
(Han, Heo and Park et al.; Ceram. Int., 2019, vol.45, pp.10481-10491) -
Extraction and Purification of Titanium and Its Alloys
Improving the production efficiency of high-titania slag in Ti extraction process: fluxing effect on formation of pseudobrookite
(Kim, Heo and Park; Scientific Reports, 2020, vol.10, article number 6530, pp.1-12) -
Physical Chemistry of Molten Salts for Producing Magnesium and Zirconium
Mechanism of MgO dissolution in MgF2-CaF2-MF (M=Li or Na) melts: Kinetic analysis via in-situ high temperature confocal scanning laser microscopy (HT-CSLM)
(Lee, Yang, Min and Park; Ceram. Int., 2019, vol.45, pp.20251-20257) -
Recovery of Precious- & Rare Metals from Electric Wastes and Industrial By-products ; Focusing on Circular Economy
Massive recycling of waste mobile phones: Pyrolysis, physical treatment, and pyrometallurgical processing of insoluble residue
(Park et al.; ACS Sustain. Chem. & Eng., 2019, vol.7, pp.14119-14125)
NEWS
GALLERY
2025 TMS EPD Pyrometallurgy Best Paper Award 수상
교수님께서 2025년 TMS EPD Pyrometallurgy Best Paper Award (건..
24 대한금속재료학회 추계학술대회(2)
24.10.28~30평창에서 열린 추계금속재료학회에 다녀왔..
전영진 논문 Accept
전영진 학생의 "Carbon Distribution Behavior between Molten Iro..
POSCO E&C (포스코이앤씨) 초청강연 (기술연..
POSCO E&C (포스코이앤씨) 초청강연 (기술연구소, ..
이민주 논문 Accept
이민주 학생의 "Distribution Behavior of Titanium between Ferro..
MOLTEN2024 (3)
2024.06.17~19호주 브리즈번에서 열린 2024 MOLTEN 학회에 ..
[AusIMM 인터뷰] "A Good Steelmaker is A Good Slagmake..
2024.05.10교수님께서 AusIMM과 인터뷰를 진행하였습니..
